Cara Mengatasi WIFI Yang Tidak Bisa Connect ke Laptop

_________________________________________________________________________________
When talking about the wireless problem does not exist it is endless with its existing wifi network or Hotspot special in its own area near the house what else it would be our pleasure in free love to surf in the internet world but the pleasure it would turn out to be to galauan if the network is not able to connect wifi on our laptop case our results can not surf the internet for free on wifi network, there is some cause or reason wifi network can not connect to the laptop we alasaan was also different each person, one one example is that many people ask is Wireless has been able to connect but not browse if you have it so it makes us peresaan surprised and pleased that we've been able to connect on a wifi network but will not be able to browse the internat yet take it just so happens that I will discuss the issue on why the problem can not connect wifi and wifi already connect but can not surf you can follow to overcome his way and hopefully be successful in your laptop.

Why can not connect wifi on your laptop or computer

If you experience any of these make sure the wifi network around your area has not been covered or if it is not affordable I can immediately conclude that you will not be able to connect to the wifi network or hotspot try not too much where you are and where the wifi network hub, If you felt it was the deck at the wifi network is and remains at all try to connect you check already active or not wifi on your laptop his way by pressing Fn + F3 on the keyboard of your laptop simultaneously.

There are many ways to reach more remote wifi network you can try using a wireless LAN (WLAN) I own no wifi networks around my house and I use REALTEK RTL8187 Wireless LAN Utility to reach or amplify the signal wifi although it is not too much to be reach but passable can connect and can make everyday browsing.

Wireless has been able to connect but not browse

You may experience such things already connect wifi but can not browsing if you experience so you can follow her on how to address the following:

See first if there is an exclamation mark or a small triangle marks the yellow on the bottom corner or we call it the systray light as if there is an exclamation point that means you already connect wifi but you can not browse the internet please if you want to try how to resolve it might just be successful and you can browse back.

  • Please log in to control panel
  • Select or click change adapter settings
  • Next right click on LAN Connection
  • Then select properties
  • If it is please double-click on Internet Protocol Version 4 (TCP/IPv4)
  • If it is we will be faced with a display that tells the details of the IP address on the computer 
  • Henceforth we only change or choose Obtain an IP address automatically
  • Please select the OK

Please see whether there is an exclamation mark in the bottom corner if it is lost it means you've succeeded and you can browse on the internet if it still has not gone wait a while until we obtain an IP address from the DHCP server hotspot


if it still does not work as well there may be a problem on your laptop wifi card.

Her usual problem in the hardware drivers try to follow berukut way to solve the problem on your laptop wifi card by looking at the device manager.


  • Please click start
  • Put writing device manager if you have found please click
  • Look at the Nerwork adapters then right click and do unistal on your laptop wifi driver
  • To install the driver wifi you can do it with right click and select scan for hardware use to detect and reinstall your wifi driver is automatically

If it is please you close the device manager page and please her reconnect to the wifi network your Internet connection and its usual will be normal again.


At both ends so this article may be useful to you and good luck

cara menghubungkan komputer server dan client

Banyak Email masuk yang menanyakan Bagaimana cara menghubungkan komputer server dan client? selalu saya jawab lewat email. Nah daripada mesti menjawab lewat email maka jawaban tersebut saya posting disini.
 
Bagaimana Cara menghubungkan komputer server dan client? sebenarnya cukup mudah yaitu sebagai berikut:
untuk menggunakan software client diperlukan minimal 2 komputer yang terhubung dalam jaringan LAN
  • satu komputer sebagai server (diinstal software server)
  • satu atau yang lain lagi client (diinstal software client)
cara setting atau pengaturan komputer server dan komputer client
  1. setting IP server dengan model statis misal 192.168.1.1
  2. pada server buka C:\Program Files\NamaSoftware cari folder dbfile
  3. sharing folder tersebut full
  4. pada client klik icon connect database dan arahkan ke server misal \\192.168.1.1\dbfile
  5. pilih file db yang nampak dan klik ok
  6. client sudah terhubung
Untuk mengatur otoritas user hanya dilakukan di komputer server selanjutnya program di komputer client akan membaca sesuai pengaturan user dan password yang dimasukkan.
Tambahan untuk cara menghubungkan komputer server dan client pada windows 7 dan windows vista caranya sama tetapi ada yang khusus yaitu : software server tidak diinstal di c:\ tapi di d:\ atau lainnya asal jangan di c:\
  1. setting IP server dengan model statis misal 192.168.1.1
  2. pada server buka D:\NamaSoftware cari folder dbfile
  3. sharing folder tersebut full
  4. pada client klik icon connect database dan arahkan ke server misal \\192.168.1.1\dbfile
  5. pilih file db yang nampak dan klik ok
  6. client sudah terhubung
Nah semoga panduan singkat ini bisa menjadikan instalasi software sekolah kami lebih lancar dan mudah. amin!! Ada pertanyaan silahkan kontak kami...